When searching for a filter or vessel by part number enter the first series of letters to find the webpage you are looking for.

High Flow Cartridges

Multi-layer, fiber-based media provide true depth-loading for high efficiency removal at low micron ratings. The larger diameter pleated design offers extremely high surface area, allowing for outstanding loading at high flow rates per single cartridge. This reduces the number of required cartridges, thus reducing the total associated costs.

HFB-Series High Flow Pleated

HFB-Series High Flow Pleated Filter Cartridges seal into most standard bag filter vessels. These cartridges deliver high efficiencies, flow rates, and loading capacities at extremely low initial pressure drops. Due to the inside-to-outside flow design, all contaminants are captured on the inside of the element, avoiding potential contamination of filtered product during change-out. Utilizing polypropylene or microglass medias along with polypropylene hardware, the HFB series offers broad chemical compatibility. With up to 48.5 ft2 of media, the HFB series offers an exceptional value.

Dimensions

Length: 12 inches (#1-size)
24 inches (#2-size)

Outside Diameter: 7.06 inches (flange) / 6 inches (cartridge)

Typical Application

  • Process Water
  • Deionized Water
  • R.O. Membrane Pre-Filtration
  • Food & Beverage
  • Cosmetics
  • Fine Chemicals
  • Produced Water
  • Waste Water
  • Amines

EHF3-Series High Flow

EHF3 cartridges directly replace the 3M/CunoTM High Flow series cartridges.

EHF3-Series High Flow Pleated Filter Cartridges are designed to address the need for critical filtration in high-flow applications. Large-diameter, high-surface area filters dramatically reduce maintenance and production downtime. The EHF3 Series cartridges are available in polypropylene and microglass media in various micron ratings. This filter utilizes polypropylene hardware to provide a robust design. Absolute ratings exceed 99% efficiencies, Nominal ratings exceed 90%.

Construction Materials

  • Filtration Media – Polypropylene or microglass
  • Support Media – Polypropylene
  • End Caps – Glass-reinforced Nylon
  • Center Core – Polypropylene
  • Outer Support Cage – Polypropylene
  • O-Rings/Gaskets – Buna, EPDM, Silicone, Viton®

Dimensions

Length: 40, 60 inches
Outside Diameter: 6.5 inches
Inside Diameter: 3.0 inches


HF-Series High Flow

HF-Series cartridges are designed for use as a direct replacement to the Pall Ultipleat™ High Flow series.

HF-Series High Flow Polypropylene and Microglass Filter Cartridges address your need for absolute rated filter cartridges in high flowrate and high solids-load applications—thermally-bonded construction utilizing polypropylene hardware for high cleanliness and broad chemical compatibility.

Inside to outside flow direction and single o-ring seal ensures against by-pass and captures all contaminants internally, thus preventing clean-side contamination during change-out. The robust molded outer cage and handle offer durability and easy installation/removal. HF-Series cartridges are designed for use as a direct replacement to the Pall Ultipleat™ High Flow series. Absolute ratings exceed 99% efficiencies, Nominal ratings exceed 90%.

Construction Materials

  • Filtration Media – Polypropylene or microglass
  • Support Media – Polypropylene
  • End Caps – Polypropylene
  • Center Core – Polypropylene
  • Outer Support Cage – Polypropylene
  • O-Rings/Gaskets – Buna, EPDM, Silicone, Viton®

Dimensions

Length: 20, 40, 60 inches
Outside Diameter: 6.25 inches


HF3-Series High Flow

HF3-Series cartridges are designed for use as a direct replacement to the 3M 740™ series elements.

HF3-Series High Flow Polypropylene and Microglass Filter Cartridges address your need for absolute-rated filter cartridges in high flowrate or high solids-load applications—thermally-bonded construction utilizing polypropylene hardware for high cleanliness and broad chemical compatibility.

Dual o-ring seal design ensures against by-pass and user-friendly handle design improves ease of installation/removal. Absolute ratings exceed 99% efficiencies, Nominal ratings exceed 90%.

Construction Materials

  • Filtration Media – Polypropylene or microglass
  • Support Media – Polypropylene
  • End Caps – Polypropylene
  • Center Core – Polypropylene
  • Outer Support Cage – Polypropylene
  • O-Rings/Gaskets – Buna, EPDM, Silicone, Viton®

Dimensions

Length: 20, 40, 60 inches
Outside Diameter: 6.25 inches