GGHNY-Series Overview
GGHNY-Series High Purity General Grade Nylon and Plus+ Nylon Filter Cartridges, featuring Nylon 6,6 membrane, provide excellent particulate retention and cleanliness for general use applications. Nylon 6,6 membrane has performed successfully over many decades, establishing a legacy of proven performance value. The optional positive zeta potential surface charge (Plus+) enhances retention performance for particulate well smaller than the stated micron rating, for applications that may include the removal of haze, color bodies, and endotoxins. Manufactured in a clean-room environment to maintain high standards of purity and cleanliness.
Typical Applications
- Drinking Water
- Wine
- Soft Drinks
- Pharmaceutical
- Fermentation
- Endotoxin Removal
Construction Materials
- Membrane: Nylon 6,6
- Support Media: Polypropylene
- End Caps: Polypropylene
- Center Core: Polypropylene
- Outer Support Cage: Polypropylene
- O-Rings/Gaskets: Buna, EPDM, Silicone, Teflon® Encapsulated Viton®, Viton®, Teflon® Encapsulated Silicone
Operating Conditions
- Change-Out ΔP (recommended): 35 PSID
- Temperature (max): 176 ̊F (80 ̊C)
- Differential Pressure (max): 50 PSID (3.4 bar) at 68 ̊F (20 ̊C)
Sanitization/Sterilization
- Filtered Hot Water: 80 ̊C for 30 min.
- Steam Sterilization: 121 ̊C for 30 min., multiple cycles
- Chemicals: Cartridges are compatible with most chemical sanitizing agents.
- Note: Stainless steel insert option required for all cartridges being hot water sanitized or steam sterilized.
Toxicity
All polypropylene components meet the specifications for biological safety per USP Class VI – 121 ̊C for plastics.
Flow Rate vs Pressure Drop
Food Safety Compliance
Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations, 21CFR. Materials used to produce filter media and hardware are deemed safe for use in contact with foodstuffs in accordance with EU Directives 2002/72/EC, 1935/2004, and/or 10/2011.
GGHNY Ordering Information
| Charge Option | GGHNY, GGHNY+ |
| Micron Ratings | 0.03, 0.05, 0.1, 0.2, 0.45, 0.65, 0.8, 1.2 |
| Length | 10″, 20″, 30″, 40″ |
| End Cap Styles | 2 = DOE Flat Gasket 3 = 222 w/ Fin 4 = 222 w/ Flat Cap 6 = 226 w/ Flat Cap 7 = 226 w/ Fin 16 = 213 Internal O-Ring 28 = 222 3-Tabs w/ Fin |
| O-Rings/Gaskets | B = Buna E = EPDM S = Silicone T = Teflon® Encapsulated Viton® V = Viton® Z = Teflon® Encapsulated Viton® |
| Adders | CS = 316SS Compression Spring I = Stainless Steel Insert |