LiquidClear™ GF-Series Pleated Synthetic Depth Media
LiquidClear GF-Series pleated synthetic depth media filter cartridges offer economical, cellulose-free construction with significant dirt-holding capacity and low-pressure drop at nominal efficiencies.
The 2.5” OD allows use in housings where larger cartridges do not fit. Manufactured in a clean-room environment to maintain high standards of purity and cleanliness.
*All data is based on absolute rated medias. Nominally rated medias will result in a pressure drop reduction of approximately 10%.
- Process Water
- Cooling Water
- Drinking Water
- R.O. Pre-Filtration
- Plating Chemicals
- Food & Beverage
- Deionized Water
- Filtration Media: Polypropylene, Polyester
- End Caps/Gasket: Polyurethane
- Core: Polypropylene
- Outer Netting: Polypropylene
Pentek®: R-Series, ECP-Series
Change Out ΔP (recommended): 20-25 PSID
Temperature (max): 140˚F (60˚C)
Differential Pressure (max): 50 PSID (3.4 bar) at 68˚F (20˚C)
- Outside Diameter: 2.7 or 4.5 inch
- Inside Diameter: 1 inch
- Lengths: 9.75 to 40 inch
Food Safety Compliance
Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations, 21CFR. Materials used to produce filter media and hardware are deemed safe for use in contact with foodstuffs in accordance with EU Directives 2002/72/EC, 1935/2004, and/or 10/2011.